Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
Graphtec FC8600-160 (64″)
New product
Best performing Cutter in its class
FC8600 series premiere cutting plotter providing higher productivity and greater ease of use
Fastest cutting speed in its class
1485 mm/s maximum cutting speed for the higher productivity.
More info
Best performing Cutter in its class
FC8600 series premiere cutting plotter providing higher productivity and greater ease of use
Fastest cutting speed in its class
1485 mm/s maximum cutting speed for the higher productivity.
Highest cutting force in its class
5.88 N (600 gf) maximum cutting force for a wide variety of applications. Expands the range of
possible cutting media such as thick film.
Reliable long-length tracking
Guaranteed 15m tracking and accuracy.
Includes basket and push rollers with 3 different pressure settings to provide a more stable media feed and to support a wider range of media. The series includes cutting widths of 61 cm (24 in.) to 162 cm (64 in.).
Specifications
|
Model
|
FC8600-60
|
FC8600-75
|
FC8600-100
|
FC8600-130
|
FC8600-160
|
|---|---|---|---|---|---|
| CPU | 32-bit CPU | ||||
| Configuration | Grit rolling type | ||||
| Drive method | Digital servo drive | ||||
| Max. cutting area (W x L) (*1) | 610 mm x 50 m | 762 mm x 50 m | 1067 mm x 50 m | 1372 mm x 50 m | 1626 mm x 50 m |
| Cutting area of guaranteed accuracy(*2) | 590 mm x 15 m | 742 mm x 15 m | 1043 mm x 10 m, 894 mm x 15 m | 1342 mm x 10 m, 894 mm x 15 m | 1603 mm x 10 m, 894 mm x 15 m |
| Mountable media width | Min. 50 mm Max. 770 mm |
Min. 50 mm Max. 920 mm |
Min. 50 mm Max. 1224 mm |
Min. 50 mm Max. 1529 mm |
Min. 50 mm Max. 1850 mm |
| Max. cross cut width | 734 mm | 886 mm | 1191 mm | 1496 mm | 1750 mm |
| Number of push rollers | 2 rollers | 2 rollers | 3 rollers | 3 rollers | 4 rollers |
| Max. cutting speed | 1485 mm/s at 45° direction | ||||
| Axial acceleration | Max. 39.2 m/s2 (4 G) in 8 steps | ||||
| Cutting force | Max. 5.88 N (600 gf) in 48 steps | ||||
| Mechanical resolution | 0.005 mm | ||||
| Programmable resolution | GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm | ||||
| Distance accuracy (*2) | Max. 0.1 mm or 0.1 % of plotted length | ||||
| Repeatability (*2) | Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) | ||||
| Minimum character size | Approx. 3 mm alphanumeric (varies depending on character font and media) | ||||
| Mountable number of tools | 1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
||||
| Blade types | Supersteel (0.9 mm or 1.5 mm diameter) | ||||
| Pen types | Water-based fiber-tip pen, Oil-based ballpoint pen | ||||
| Pouncing tool type | Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12) | ||||
| Media types (*3) | Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick, Sandblast resist rubber up to 1 mm thick |
||||
| Compatible paper for pouncing | Regular paper from 0.06 to 0.13 mm thick | ||||
| Light pointer | Built into the tool carriage | ||||
| Cross-cutter | Built into the tool carriage | ||||
| Perforation cutting | Supported (performed by force control) | ||||
| Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect | ||||
| Standard interface | USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX) | ||||
| Buffer memory | 2 MB | ||||
| Command sets | GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select) | ||||
| Condition settings | Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user) | ||||
| Display | Graphic type LCD (3-inch, backlight) | ||||
| Power source | 100 V to 240 V AC, 50 / 60 Hz | ||||
| Power consumption | Max. 160 VA | ||||
| Operating environment | 10 to 35 °C, 35 to 75 % R.H. (non-condensing) | ||||
| Guaranteed accuracy environment | 16 to 32 °C, 35 to 70 % R.H. (non-condensing) | ||||
| External dimensions (W x D x H) | Approx. 1128 x 715 x 1219 mm | Approx. 1278 x 715 x 1219 mm | Approx. 1578 x 715 x 1219 mm | Approx. 1878 x 715 x 1219 mm | Approx. 2138 x 715 x 1219 mm |
| Weight | Approx. 38 kg including stand |
Approx. 42 kg including stand |
Approx. 46 kg including stand |
Approx. 50 kg including stand |
Approx. 59 kg including stand |
| Included software (*4) | Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3 | ||||
| Compatible OS (*4) | Windows 10 / 8.1 / 8 / 7 / Vista Mac OS 10.6 to 10.10 |
||||
| Compatible Standards | UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC) | ||||
| FCC-A, EN55022-A | |||||
Standard accessories
|
Item
|
Q'ty
|
Description
| |
|---|---|---|---|
| Power cord | 1 | The type of cord is different by destination | |
| Cutting blade holder | 1 | PHP33-CB09N-HS | |
| Cutting blade | 1 | CB09UB | |
| Fiber-tip pen holder | 1 | PHP31-FIBER | |
| Water-based fiber-tip pen | 1 | KF700-BK (black ink) | |
| Stand | 1 | Parts kit of stand | |
| Media stocker | 1 | Set of stock rollers and mounting brackets (Installed on the stand) | |
| Basket | PG0039 | 1 | Parts kit for FC8600-60 |
| PG0040 | Parts kit for FC8600-75 | ||
| PG0041 | Parts kit for FC8600-100 | ||
| PG0042 | Parts kit for FC8600-130 | ||
| PG0043 | Parts kit for FC8600-160 | ||
| USB cable | 1 | Cable for USB2.0, 2.9m long | |
| DVD-ROM | 1 | User manual (PDF format), Windows driver, Software (Plotter controller, Graphtec Studio, Cutting Master 3) | |
| Manual | 2 | Quick start and safety guide | |